View ACMD-6007_8962183.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ACMD-6007 lte band 7 duplexer data sheet description the avago ACMD-6007 is a highly miniaturized duplexer designed for use in lte band 7 (2500 C 2570 mhz ul, 2620 C 2690 mhz dl) handsets and mobile data terminals. low insertion loss in the tx channel minimizes current drain from the power amplifier, while low rx channel insertion loss improves receiver sensitivity. the ACMD-6007 enhances the sensi tivity and dynamic range of handset receivers by providing high isolation of the transmitted signal from the receiver input and high rejection of transmit-generated noise in the receive band. the ACMD-6007 is designed with avago technologies innovative film bulk acoustic resonator (fbar) technol- ogy, which makes possible ultra-small, high-q filters at a fraction of their usual size. the excellent power handling capability of fbar bulk-mode resonators supports the high output power levels used in mobile communications applications, while adding virtually no distortion. the ACMD-6007 also utilizes avago technologies advanced microcap bonded-wafer, chip scale packaging technology. this process allows the filters to be assembled into a molded chip-on-board module with an overall maximum size of only 2.0 x 2.5 mm and maximum height of 0.95 mm. the ACMD-6007 is compatible with standard 2.0 x 2.5 mm duplexer pcb footprints. functional block diagram features miniature size C 2.0 x 2.5 mm max size C 0.95 mm max height C standard 2 x 2.5 mm pcb footprint high isolation high power rating C 33 dbm abs max tx power environmental C rohs compliant C halogen free C tbbpa free specifications rx band performance, 2620-2690 mhz, C20 to +85c C insertion loss: 2.5 db max C rx noise blocking: 50 db min tx band performance, 2500-2570 mhz, C20 to +85c C insertion loss: 2.1 db max C tx interferer blocking: 55 db min applications lte handsets or data terminals oper ating in the band 7 frequency range. ant port 3 rx port 2 tx port 1
2 ACMD-6007 electrical specifications [2] , z 0 =50 , t c [1] as indicated symbol parameter units C20c +25c +85c min typ [3] max min typ [3] max min typ [3] max antenna port to receive port s23 insertion loss in receive band (2620 C 2690 mhz) db 2.5 1.6 2.5 2.5 s22 return loss (swr) of receive port in receive band (2620 C 2690 mhz) db 9.5 (2.0) 9.5 17 (1.3) (2.0) 9.5 (2.0) s23 attenuation in transmit band (2500 C 2570 mhz) db 45 45 57 45 s23 attenuation, 1 C 2380 mhz db 30 30 32 30 s23 attenuation, 2380 C 2450 mhz db 35 35 48 35 s23 attenuation, 2450 C 2484 mhz db 35 35 51 35 s23 attenuation, 2775 C 6000 mhz db 20 20 38 20 transmit port to antenna port s31 insertion loss in transmit band (2500 C 2570 mhz) db 2.0 1.8 2.0 2.1 s11 return loss (swr) of transmit port in transmit band (2500 C 2570 mhz) db 10 (1.9) 10 18 (1.3) (1.9) 10 (1.9) s31 attenuation in receive band (2620 C 2690 mhz) db 45 45 58 45 s31 attenuation, 10 C 1574 mhz db 30 30 42 30 s31 attenuation in gps rx band (1574.42 C 1576.42 mhz) db 45 45 57 45 s31 attenuation, 1577 C 1680 mhz db 25 25 50 25 s31 attenuation, 1845 C 1880 mhz db 30 30 42 30 s31 attenuation, 2110 C 2170 mhz db 30 30 34 30 s31 attenuation, 2400 C 2450 mhz db 30 30 57 30 s31 attenuation in transmit 2 nd harmonic band (5000 C 5140 mhz) db 20 20 39 20 s31 attenuation, 5150 C 5850 mhz db 20 20 35 20 s31 attenuation, 7500 C 7710 mhz db 20 20 37 20 antenna port s33 return loss (swr) of ant port in rx band (2620 C 2690 mhz) db 10 (1.9) 10 18 (1.3) (1.9) 10 (1.9) s33 return loss (swr) of ant port in tx band (2500 C 2570 mhz) db 10 (1.9) 10 16 (1.3) (1.9) 10 (1.9) isolation transmit port to receive port s21 tx-rx isolation in receive band (2620 C 2690 mhz) db 50 50 58 50 s21 tx-rx isolation in transmit band (2500 C 2570 mhz) db 55 55 61 55 notes: 1. t c is the case temperature and is defined as the temperature of the underside of the duplexer where it makes contact with the circ uit board. 2. min/max specifications are guaranteed at the indicated tempera ture with the input power to the tx ports equal to or less than +29 dbm over all tx frequencies unless otherwise noted. 3. typical data is the average value of the parameter over the indica ted band at the specified temperature. typical values may v ary over time.
3 absolute maximum ratings [1] parameter unit value storage temperature c C65 to +125 maximum rf input power to tx port dbm +33 maximum recommended operating conditions [2] parameter unit value operating temperature, t c [3] , tx power 29 dbm, cw c C40 to +100 operating temperature, t c [3] , tx power 30 dbm, cw c C40 to +85 notes: 1. operation in excess of any one of these conditions may result in permanent damage to the device. 2. the device will function over the recommended range without degradation in reliability or permanent change in performance, b ut is not guaranteed to meet electrical specifications. 3. t c is defined as case temperature, the temperature of the underside of the duplexer where it makes contact with the circuit board.
4 -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 2500 2510 2520 2530 2540 2550 2560 2570 insertion loss (db) frequency (mhz) -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0 insertion loss (db) 2620 2630 2640 2650 2660 2670 2680 2690 frequency (mhz) -30 -25 -20 -15 -10 -5 0 2400 2500 2600 2700 2800 return loss (db) frequency (mhz) -70 -60 -50 -40 -30 -20 -10 0 2400 2500 2600 2700 2800 insertion loss (db) frequency (mhz) -80 -70 -60 -50 -40 -30 -20 -10 2400 2500 2600 2700 2800 insertion loss (db) frequency (mhz) -30 -25 -20 -15 -10 -5 0 2400 2500 2600 2700 2800 return loss (db) frequency (mhz) ACMD-6007 typical performance at t c = 25 c figure 1. txCant insertion loss. figure 2. antCrx insertion loss. figure 4. tx and rx port return loss. figure 3. tx rejection in rx band and rx rejection in tx band. figure 6. antenna port return loss. figure 5. txCrx isolation.
5 figure 7. txCant and antCrx wideband insertion loss . figure 8. txCant rejection in gps band. figure 10. antCrx low frequency rejection, 50 C 2500 mhz. figure 9. txCant low frequency rejection, 50 C 1574 mhz. figure 12. txCant low frequency rejection, 1577 C 1680 mhz. figure 11. antCrx rejection, 2775 C 6000. ACMD-6007 typical performance at t c = 25 c -70 -60 -50 -40 -30 -20 -10 0 2000 4000 6000 8000 insertion loss (db) frequency (mhz) -70 -65 -60 -55 -50 -45 -40 500 1000 1500 insertion loss (db) frequency (mhz) -60 -55 -50 -45 -40 -35 3000 3500 4000 4500 5000 5500 6000 insertion loss (db) frequency (mhz) -70 -68 -66 -64 -62 -60 -58 -56 -54 -52 -50 1574 1575 1576 1577 1578 insertion loss (db) frequency (mhz) -60 -55 -50 -45 -40 -35 -30 500 1000 1500 2000 2500 insertion loss (db) frequency (mhz) -70 -68 -66 -64 -62 -60 -58 -56 -54 -52 -50 1580 1600 1620 1640 1660 insertion loss (db) frequency (mhz)
6 figure 13. txCant low frequency rejection, 1845 C 1880 mhz. figure 14. txCant low frequency rejection, 2110 C 2170 mhz. figure 16. txCant low frequency rejection at tx 2 nd harmonic, 5000 C 5140 mhz. figure 15. txCant low frequency rejection, 2400 C 2450 mhz. figure 17. txCant low frequency rejection, 5150 C 5850 mhz. ACMD-6007 typical performance at t c = 25c figure 18. txCant low frequency rejection, 7500 C 7710 mhz. -50 -49 -48 -47 -46 -45 -44 -43 -42 -41 -40 1845 1850 1855 1860 1865 1870 1875 insertion loss (db) frequency (mhz) -80 -70 -60 -50 -40 -30 -20 -10 0 2400 2410 2420 2430 2440 2450 insertion loss (db) frequency (mhz) -50 -48 -46 -44 -42 -40 -38 -36 -34 -32 -30 5200 5300 5400 5500 5600 5700 5800 insertion loss (db) frequency (mhz) -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 2110 2120 2130 2140 2150 2160 2170 insertion loss (db) frequency (mhz) -40.0 -39.5 -39.0 -38.5 -38.0 -37.5 -37.0 -36.5 -36.0 -35.5 -35.0 5000 5020 5040 5060 5080 5100 5120 5140 insertion loss (db) frequency (mhz) -40 -38 -36 -34 -32 -30 -28 -26 7500 7550 7600 7650 7700 insertion loss (db) frequency (mhz)
7 figure 19. tx port impedance in tx band. figure 20. rx port impedance in rx band. figure 22. ant port impedance in rx band. figure 21. ant port impedance in tx band. ACMD-6007 typical performance at t c = 25c 1020 50 0.4 0.6 0.8 1 1.5 2 3 4 5 10 20 50 -0.4 -0.6 -0.8 -1 -1.5 -2 -3 -4 -5 -10 -20 -50 345 0.2 0.4 0.6 0.8 1 1.5 2 1020 50 0.4 0.6 0.8 1 1.5 2 3 4 5 10 20 50 -0.4 -0.6 -0.8 -1 -1.5 -2 -3 -4 -5 -10 -20 -50 345 0.2 0.4 0.6 0.8 1 1.5 2 1020 50 0.4 0.6 0.8 1 1.5 2 3 4 5 10 20 50 -0.4 -0.6 -0.8 -1 -1.5 -2 -3 -4 -5 -10 -20 -50 345 0.2 0.4 0.6 0.8 1 1.5 2 1020 50 0.4 0.6 0.8 1 1.5 2 3 4 5 10 20 50 -0.4 -0.6 -0.8 -1 -1.5 -2 -3 -4 -5 -10 -20 -50 345 0.2 0.4 0.6 0.8 1 1.5 2
8 notes: 1. dimensions in millimeters tolerance: x.x 0.1 mm x.xx 0.05 mm 2. dimensions nominal unless otherwise noted 3. angles 45 nominal 4. i/o pads (3 ea) size: 0.40 x 0.40 mm spacing to ground metal: 0.30 mm 5. contact areas are gold plated figure 23. package outline drawing. pin connections: 1 rx 2, 4, 5, 7, 9 gnd 3 tx 6 ant 8 optional: gnd, nc or rx(C) orientation mark rx 2.5 max 0.95 max tx 2.0 max 2.30 top view bottom view side view ant 1.80 gnd opt gnd gnd gnd (gnd) 0.40 0.40 0.40 0.40 1.15 0.90 0.90 (6) (9) (8) (2) 0.40 (3) (4) (5) (7) 0.40 (1) figure 24. pad detail. 0.05 x 45 0.40 0.1 0.15 x 45 i/o pads (3 pls) center ground pad 0.40 0.1 0.90 (ref) 0.40 (ref) ACMD-6007
9 figure 25. suggested pcb layout. a pcb layout using the principles illustrated in the figure above is recommended to optimize performance of the ACMD-6007. the transmission line dimensions shown are designed to achieve an impedance of 50 ohms for an 80m thick pcb layer with a dielectric constant of 3.4. if other pcb materials or thicknesses are used, the 0.25 mm gap spacing may need to be adjusted to retain a zo of 50 ohms. it is important to maximize isolation between the tx and rx ports. high isolation is achieved by: (1) maintaining a continuous ground plane around the i/o connections and duplexer mounting area, and (2) surrounding the i/o ports with sufficient ground vias to enclose the connections in a faraday cage. the ground vias under the ACMD-6007 mounting area are also needed to provide adequate heat sinking for the device. 1.90 0.95 3 x 0.50 x 0.50 land pad 1.40 9 x 0.20 3 x 0.90 x .095, chamfer 0.12 x 45 ground plane opening for land pad 3 x 0.20 50-ohm line 6 x 0.25 typ (adjust for 50 ohms) tx rx ant notes: 1. dimensions in mm 2. top view ACMD-6007
10 note: 1. top view figure 26. pcb layout, via detail. figure 27. ACMD-6007 superposed on pcb layout. notes: 1. dimensions in mm 2. top view 3. via arrays: horiz pitch = 0.25, vert pitch = 0.25 141 x ? 0.10 via via array 1 2 x 0.17 via array 3 2 x 0.12 2x 0.12 via array 2 2.30 1.80 8 x 0.40 x 0.40 0.30 x 0.80 chamfer 0.12 x 45 figure 28. recommended solder stencil. figure 29. solder stencil superposed on ACMD-6007. notes: 1. dimensions in mm 2. top view 3. chamfer or radius all corners 0.05 mm min notes: 1. top view 2. peripheral clearance of stencil aperture for center device pad is 0.05 mm. all other apertures match device pad 1:1 ACMD-6007
11 figure 32. product marking and pin orientation. figure 30. recommended solder mask. figure 31. solder mask superposed on ACMD-6007. notes: 1. dimensions in mm 2. top view notes: 1. top view 2. mask apertures match device pads 1:1 2.30 1.80 8 x 0.40 x 0.40 0.90 > 0.30 typ > 0.30 typ 0.15 x 45 rx tx ant orientation mark avago nfiyww ddxxxx avago = mfg (avago technologies, inc.) n = ACMD-6007 fi = mfg information y = year ww = work week dd = date code xxxx = a ssembly lot ACMD-6007
12 figure 33. smd tape packing. figure 34. unit orientation in smt tape. ACMD-6007 4.00 0.10 4.00 0.10 12.00 +0.30 2.75 0.10 0.25 0.02 1.10 0.10 10 max ? 1.0 0.05 2.00 0.05 5.50 0.05 1.75 0.01 ? 1.5 0.1 b. k. a. 2.25 0.10 10 max poc ket ca vity pac k ag e or ie n t a ti on a v ago a ffy mm dd xxxx a v ago a ffy mm dd xxxx a v ago a ffy mm dd xxxx a v ago a ffy mm dd xxxx a v ago a ffy mm dd xxxx a v ago a ffy mm dd xxxx sproc ket h o le s
13 figure 35. smt reel drawing. ACMD-6007 notes: 1. reel shall be labeled with the following information (as a minimum). a. manufacturers name or symbol b. avago technologies part number c. purchase order number d. date code e. quantity of units 2. a certificate of compliance (c of c) shall be issued and accompany each shipment of product. 3. reel must not be made with or contain ozone depleting materials. 4. all dimensions in millimeters (mm) 50 m i n . 1 2.4 + 2.0 - 0.0 1 8.4 max . 25 m i n w ide ( re f) s l o t f or c a rrier tap e i n ser t io n f or atta c hm e nt t o ree l hub ( 2 pla ces 1 80 apa r t) bac k view f ron t view 1 78 s ha di ng i n dic at es th r u s l o t s + 0.4 - 0.2 2 1 .0 0.8 1 3.0 0.2 1 .5 m i n .
for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies in the united states and other countries. data subject to change. copyright ? 2005-2010 avago technologies. all rights reserved. av02-2568en - july 5, 2010 package moisture sensitivity feature test method performance moisture sensitivity level (msl) at 260c jesd22-a113d level 3 0 50 100 150 200 250 300 ti m e, seconds 0 50 100 150 200 250 300 te mp er a ture, c profile.grf profile. wmf 6 fe b ru a ry 2003 r. w a u g h tested p ro?le sho w n. figure 36. verified smt solder profile. ordering information part number no. of devices container ACMD-6007-blk 100 anti-static bag ACMD-6007-tr1 3000 178 mm (7-inch reel

▲Up To Search▲

Price & Availability of ACMD-6007

	To Download ACMD-6007 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .